For Chevy Malibu 2016 2017 18 Front Bumper Cover & Front Upper And Lower Grille

Description

For Chevy Malibu 2016 2017 2018
Front Bumper Cover & Front Upper Lower Grille
Front Bumper Cover
Reminder: 1: Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover. 2: If you see any minor scuffs, don’t worry—your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.
3: We have reserved sensor holes on the back of the product. If you need, please make holes by yourself. At the same time,if your part doesn't need the sensor holes,you can install it directly as well.
For Chevy Malibu 2016 2017 18 Front Bumper Cover & Front Upper And Lower Grille
For Chevy Malibu 2016 2017 2018
Front Bumper Cover & Front Upper Lower Grille
Front Bumper Cover
Reminder:
1: Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover.
2: If you see any minor scuffs, don’t worry—your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.
3: We have reserved sensor holes on the back of the product. If you need, please make holes by yourself. At the same time,if your part doesn't need the sensor holes,you can install it directly as well.
Note:
Folding our bumper covers to help you enjoy savings on shipping costs. When you recieve the bumper covers, you need unfold your bumper cover.Here’s a step by step guide on how to unpack, unfold.
Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.
Front Upper&Lower Grille
Color :
Chrome & Black
Position :
Front Upper & Lower
Material :
ABS Plastic /Polycarbonate Lens.Made from high grade OE comparable materials to withstand rough road wear and the test of time.
Installation :
Direct bolt-on replacement. No modification required. Product does not come with installation instructions, please refer to a shop/factory manual for installation.
Package includes :
Front Bumper Cover x 1
Front Upper Grille x 1
Front Lower Grille x 1
Item Specifics
Brand
Unbranded
Manufacturer Part Number
AL1052940LV
Product Name
Bumper Cover & Front Grille
Placement on Vehicle
Front , Upper , Lower
Color
Black and Chrome
Grille Material
ABS Plastic
Fitment Type
Direct Replacement
Bumper Surface Finish
Primered
Grille Surface Finish
Chrome
Package Includes
Bumper Cover*1 , Upper Grille *1 , Lower Grille*1
Condition
New
Bumper Cover Parking aid sensor holes
WITH PARK ASSIST SENSOR HOLES
Fitment
For Chevrolet Malibu 16 17 18 Bumper Cover Grille
Years
2016 2017 2018
UPC
Does not apply
Warranty
1 Year
Payment
We accept payment through PayPal only. Payments must be received within 14 days of auction end.
We process your order within 3 business day upon payment(note: NOT counting holidays or weekends).
Local pickup NOT available at this time.
Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location.
Returns
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
About Us
Based in California, offering  high quality Exterior＆Interior automobile parts .
Pick up orders welcome here and we also offer great discount for wholesales.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Lighting & Lamps
◈  Fog Lights
◈  Modified lights
◈  Headlight brackets
◈  Tail lights
◈  Brake Lights
◈  Headlight
◈  Interior lights
Auto Interior Parts
◈  Plastic Rivets Fasteners
◈  Trunk Shield
◈  Armrest Center Box Cover
◈  Cup Holder
◈  Inside Door Handle
◈  Car Seat Cover
◈  Car Floor Mats
◈  Sun Visor
◈  Seal Belt
◈  Fuel Cell Tank
◈  Others
Exterior Trimming Parts
◈  Front Bumper
◈  Rear Bumper
◈  Car Mirror
◈  Trunk Spoiler Wing
◈  Towing Trailer Hitch Receiver
◈  Front Spoiler Lip
◈  Others
◈  Windshield Wiper Blades
◈  Window Visors/Rain Guard
◈  Hinge
◈  Fuel tank cap
◈  Door Handle
◈  Fender Flares
◈  Bumper Grille
◈  Running Boards/Side Steps
◈  Front bumper trim
◈  Auto body trim panel
Other
Hot Item
Door Trim Panel Plastic Retainer 50pcs Push Rivet Fastener Clips for Ford GMC
USD 7.99
For Chevy Malibu 2016 2017 18 Front Bumper Cover & Front Upper And Lower Grille
USD 295.09
For Ford Focus 2015 2016 2017 2018 S/SE/SEL New Primed Front Bumper Cover
USD 117.03
New Rear Step Bumper Face Bar Assembly For Toyota Tacoma 1995-2004
USD 153.96
Primed Front Bumper Cover For 2013-2015 2016 Ford Fusion W/o Park Sensor Hole
USD 145.69
Picture
New List Item
Factory Radiator Coolant Cap 16401-20353 Fit For Toyota Lexus Camry Corolla
USD 9.48
Handle and Grommet 4x Box Kit For Dodge Ram 1500 2500 3500 68054996AA 68054997AB
USD 30.66
Tan Driver Side Bottom Seat Cover 0306ESC152DRBT For 2003-2006 Cadillac Escalade
USD 52.46
55275631AB Upper Left Drivers Side Front Door Hinge For 2003-09 Dodge Ram Dakota
USD 32.16
2x 4-Side H4 9003 HB2 6000K 2240W 336000LM LED Headlight KIT High/Low Beam New
USD 12.24
For Chevy Malibu 2016 2017 18 Front Bumper Cover & Front Upper And Lower Grille
For Chevy Malibu 2016 2017 2018
Front Bumper Cover & Front Upper Lower Grille
Front Bumper Cover
Reminder:
1: Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover.
2: If you see any minor scuffs, don’t worry—your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.
3: We have reserved sensor holes on the back of the product. If you need, please make holes by yourself. At the same time,if your part doesn't need the sensor holes,you can install it directly as well.
Note:
Folding our bumper covers to help you enjoy savings on shipping costs. When you recieve the bumper covers, you need unfold your bumper cover.Here’s a step by step guide on how to unpack, unfold.
Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.
Front Upper&Lower Grille
Color :
Chrome & Black
Position :
Front Upper & Lower
Material :
ABS Plastic /Polycarbonate Lens.Made from high grade OE comparable materials to withstand rough road wear and the test of time.
Installation :
Direct bolt-on replacement. No modification required. Product does not come with installation instructions, please refer to a shop/factory manual for installation.
Package includes :
Front Bumper Cover x 1
Front Upper Grille x 1
Front Lower Grille x 1
Payment
Shipping
Returns
Contact Us
About Us
We accept payment through PayPal only. Payments must be received within 14 days of auction end.
We process your order within 3 business day upon payment(note: NOT counting holidays or weekends).
Local pickup NOT available at this time.
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location.
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Based in California, offering  high quality Exterior＆Interior automobile parts .
Pick up orders welcome here and we also offer great discount for wholesales.
All rights reserved.